larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Oct 24, 2022 17:59:21 GMT -7
Wow, I see now. They are a totally different design than the universal ones. Edit: I found a part number that can be ordered from Europe for cruise control models (Tracer 9 GT for example). I am ordering from www.motorcyclespareparts.eu. Part number is B5U-829A0-01-00. From that same MT-09 thread, these should fit cruise controls models with no modifications. I will report back when I receive them. |
|
Sponsored Ad
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Oct 24, 2022 19:37:02 GMT -7
If the connection doesn’t work you can connect the universal straight to the battery if I recall
|
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Oct 24, 2022 19:46:29 GMT -7
Please keep us posted. I might go the same route. I found this on the MT-09 forum. The grips are different for the non- cruise control models and he had to make a modification to the grip. It seems like the tracer 9GT grip warmers are a perfect fit for the MT09 SP (CC version) Unfortunately I also found out that the MT09 SP stock throttle tube (BAM-26240-00-00) is different than the one from the MT10(BEA-26240-00-00) although the left grip (clutch side) is the same for both bikes (2C0-26241-00-00) which would expalin why the grip warmer from the tracer 9GT works with the MT09 SP but not the MT10 Look at my posts from a few months ago. I tried them and they didn’t work because the mt09 sp and mt10 have a different throttle tube. Mt09 sp and tracer 9 gt are interchangeable on the other hand (after all they have the same engine) |
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Oct 24, 2022 19:54:56 GMT -7
It seems like the tracer 9GT grip warmers are a perfect fit for the MT09 SP (CC version) Unfortunately I also found out that the MT09 SP stock throttle tube (BAM-26240-00-00) is different than the one from the MT10(BEA-26240-00-00) although the left grip (clutch side) is the same for both bikes (2C0-26241-00-00) which would expalin why the grip warmer from the tracer 9GT works with the MT09 SP but not the MT10 Look at my posts from a few months ago. I tried them and they didn’t work because the mt09 sp and mt10 have a different throttle tube. Mt09 sp and tracer 9 gt are interchangeable on the other hand (after all they have the same engine) Dang. |
|
imfa
New Member
Posts: 11
Likes: 6
Registered: Jun 19, 2022 6:30:51 GMT -7
|
Post by imfa on Dec 17, 2022 10:57:16 GMT -7
There is a new part for 2023 that could be the real one. It is up on the eu Yamaha page at least. Partnr is B5U-829A0-10-00.
|
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Dec 28, 2022 20:47:31 GMT -7
|
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Dec 29, 2022 10:03:35 GMT -7
Yes. It looks like they finally have it on their site somewhere in the world. They’re both on the up and French website but not yet available/ in stock. Also nothing on the US website. We’re getting closer though Did they even market the older models’ grips to the US? I thought everyone here had to import them? |
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Dec 29, 2022 10:09:19 GMT -7
Also, the part number is very close to the Tracer GT (B5U-829A0-10-00 vs. B5U-829A0-00-00). Don’t order the -00-00 kit.
|
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Dec 29, 2022 10:20:57 GMT -7
Sorry to spam everyone’s notifications this morning. I found that the correct part is already listed on motorcycle spare parts.eu, so I ordered it to see if it’s really available or if it’s going to be back ordered for awhile or whatnot: www.motorcyclespareparts.eu/en/yamaha-parts/b5u829a01000 |
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Dec 29, 2022 11:01:34 GMT -7
|
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Dec 29, 2022 11:06:07 GMT -7
Yes. It looks like they finally have it on their site somewhere in the world. They’re both on the up and French website but not yet available/ in stock. Also nothing on the US website. We’re getting closer though Did they even market the older models’ grips to the US? I thought everyone here had to import them? I'm not sure but the previous grip warmers were not controlled via the TFT so they could be fitted on almost any yamaha. I had them on my MT09, bought the OEM on ebay but cant remember if they came from europe or usa the 2017 mt09 us version had connectors pre wired so it was not necessary to go directly to the battery |
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Jan 4, 2023 6:57:06 GMT -7
Very interesting on the Tracer notes above. I couldn't see why they'd have different grips for different parts of the world. And yes, I have a set of the older grips that I'm going to give to my wife for her FZ-07, but weren't there any models with TFT-controlled optional grips? I guess the 2021 models didn't have the TFT so probably didn't have these grips.
Even so, I could have sworn the universal grips were a European only thing as well, but who knows? That was years ago.
Lastly, looks like the grips are due into MSP in a week on the 11th, so we will see from there.
|
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Jan 5, 2023 7:56:25 GMT -7
larsony99 Like you, I don't think there is a difference between EU and US version. After more research, it looks more and more that the part you ordered will fit on the mt10 (after all, it is listed as the correct part# on the EU site) when I ordered the OEM throttle tube of the tracer 9GT it didnt fit the mt10. Someone did the same thing on the mt09 forum and they're saying that the tracer 9GT fits the standard mt09 but the tracer 9 fits the mt09 sp (because of cruise control). Post #65 www.fz09.org/threads/2021-sp-careful-about-the-oem-grip-heater-b7n-829a0-00-00-installation-howto.69354/page-4#post-937829It is somewhat strange because the tracer9GT has CC as far as I know so I don't understand why it fits the non CC version of the mt09. But everyone who ordered the tracer9 throttle tube (rather than GT) said it worked on their mt09 w/ CC which should work on ours too. Only one way to find out, once you receive it next week but I am fairly confident it will work fine!
|
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Jan 9, 2023 9:25:00 GMT -7
Well, it's already shipped and due on my doorstep this Wednesday. We will all know soon!!
|
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Jan 9, 2023 11:16:03 GMT -7
If the throttle tube fits properly, make sure you try canceling cruise control by rolling the throttle forward when you’re in a safe road with not too many cars around you.
If I recall correctly some members on the MT09 forum had that issue and had to modify the throttle tube slightly to enable that (although it was a different part number I think)
|
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Jan 9, 2023 11:42:40 GMT -7
Well, it’s 36F/2.2C so I will be testing this function in my garage lol.
|
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Jan 9, 2023 14:38:03 GMT -7
oh right... haha
It's a little warmer here (Phoenix, Arizona) so if the throttle tube is good I'll order them and try the CC to make sure
|
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Jan 11, 2023 15:38:15 GMT -7
Gripes are delivered but I won’t have time to mess around with them until later tonight. Hopefully I’ll have some news later today. The instructions in the box do state they are for the Tracer though lol.
|
|
semprenissart
Full Member
Posts: 124
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Jan 11, 2023 17:34:09 GMT -7
even if it says tracer it might be fine. As long as it doesnt say tracer GT...
compare the throttle tubes whenever you get to it and even if it's slightly different try to see if it fits.
Once you connect them you should be able to enter the menu settings on the TFT and go through the different levels of heat (there are 10 levels and you can preset 3 different settings if i recall properly)
Don't hesitate asking here if you have any questions
|
|
larsony99
Junior Member
Posts: 50
Likes: 22
Registered: Oct 24, 2022 9:26:11 GMT -7
|
Post by larsony99 on Jan 11, 2023 20:55:59 GMT -7
larsony99 Like you, I don't think there is a difference between EU and US version. After more research, it looks more and more that the part you ordered will fit on the mt10 (after all, it is listed as the correct part# on the EU site) when I ordered the OEM throttle tube of the tracer 9GT it didnt fit the mt10. Someone did the same thing on the mt09 forum and they're saying that the tracer 9GT fits the standard mt09 but the tracer 9 fits the mt09 sp (because of cruise control). Post #65 www.fz09.org/threads/2021-sp-careful-about-the-oem-grip-heater-b7n-829a0-00-00-installation-howto.69354/page-4#post-937829It is somewhat strange because the tracer9GT has CC as far as I know so I don't understand why it fits the non CC version of the mt09. But everyone who ordered the tracer9 throttle tube (rather than GT) said it worked on their mt09 w/ CC which should work on ours too. Only one way to find out, once you receive it next week but I am fairly confident it will work fine! No dice. The throttle grip is the same as the quoted post from the FZ09 forum. I contacted Motorcycle Spare Parts to see if they could provide clarity. I may also contact Yamaha UK if I get nowhere with MSP EU. Lastly, I need to get to bed tonight as I’m on east coast time, but I think one of the linked threads has some deemed modifications to the Tracer GT throttle tube that allows it to work correctly with our style cruise control if all else fails and Yamaha never gets their act together. |
|
