Deleted
Posts: 0
Registered: Nov 23, 2024 3:41:13 GMT -7
|
Post by Deleted on Apr 3, 2017 8:42:28 GMT -7
|
|
Sponsored Ad
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Apr 3, 2017 9:54:44 GMT -7
If anyone is looking for a part number to order it. Might get this decat pipe and chime back in. Parts unlimited link |
|
mikem73
Junior Member
Posts: 53 
Likes: 20
|
Post by mikem73 on Apr 5, 2017 16:41:32 GMT -7
Interesting looking pipe there if you get it let us know how it worked out for you!
|
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Apr 8, 2017 14:27:32 GMT -7
Ordered one, should be here sometime next week.
|
|
tonysal
Full Member
Posts: 134
Likes: 74
|
Post by tonysal on Apr 12, 2017 13:20:59 GMT -7
fzwaffle,
love to hear your thoughts about this once you get it and install it. love the look of the Akra 3/4 system, but not thrilled about spending $1400 for it, and haven't heard it in person to determine if I like it. I'd love to be able to reutilize the stock can, but slv tried using the stock can with other mid-pipes (Mivv, I think, but there are others, too) and stated it was obnoxiously loud, so he went to a 3/4 Yosh system. I don't want to be obnoxiously loud, but I would like a little more sound, so maybe this is the way forward?
regards, Tony |
|
kup0236
Full Member
Posts: 178
Likes: 116
Registered: Nov 1, 2016 11:52:23 GMT -7
|
Post by kup0236 on Apr 12, 2017 13:55:16 GMT -7
I had the same problem. Decat and midpipe +stock exhaust = obnoxiously loud. Ended up with a Graves pipe and it was just the same. I had a machinist make a silencer for the exhaust and it's much better. But for the money I spent I could have bought the 3/4 Yoshimura system.
|
|
guywithfz10
Full Member
Posts: 218
Likes: 160
Registered: Sept 1, 2016 17:49:46 GMT -7
|
Post by guywithfz10 on Apr 12, 2017 14:04:08 GMT -7
I have the Austin Racing GP1R exhaust on my bike right now. I always ride with earplugs and I find that it is the perfect volume level for me when I'm riding. I tried riding with the baffle in for a while and it makes it decently quiet but makes the sound all raspy which I did not like. I have the baffle out again and it sounds amazing. I'm pretty sure its very loud for drivers and pedestrians around me but I don't really care much for them. I hate drivers here because they are always texting and driving and I can see them doing that in my mirrors so they can just suck it and enjoy my loud bike.
|
|
Deleted
Posts: 0
Registered: Nov 23, 2024 3:41:13 GMT -7
|
Post by Deleted on Apr 13, 2017 4:45:42 GMT -7
I'm pretty sure its very loud for drivers and pedestrians around me but I don't really care much for them. I hate drivers here because they are always texting and driving and I can see them doing that in my mirrors so they can just suck it and enjoy my loud bike. hahaha you made me laugh pretty good  I had a MIVV decat with the stock exhaust and it sounded good but was pretty loud. Decel pop was a sharp report. The Yoshi 3/4 I have now has a deeper tone, popping is greatly reduced and sounds like a deep boom, and overall a little quieter. Its still the loudest bike I've owned but I don't care. Most of the time I clutch in and rev the motor instead of using the horn. I asked Graves about the hideously long can on their decat exhaust ( Graves Decat Exhaust) when it first came out and they replied that the can had to be that long to get the sound levels down to the target demographic. |
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Apr 13, 2017 9:10:57 GMT -7
Going to pick up the decat pipe today, will post a bunch of pictures. I still gotta get the block off plates and send out the ecu before I install it. I share the same opinion as guywithfz10  |
|
Deleted
Posts: 0
Registered: Nov 23, 2024 3:41:13 GMT -7
|
Post by Deleted on Apr 13, 2017 10:05:42 GMT -7
Fantastic! If you can take a pic with flash from the outlet side of the decat pipe it looks like you may be able to get a glimpse of what the inside of the little resonator looks like. I'm wondering if its contains a baffle or just open space.
|
|
mrhix
Full Member
Posts: 119
Likes: 58
Registered: Sept 11, 2016 19:24:17 GMT -7
|
Post by mrhix on Apr 13, 2017 10:44:40 GMT -7
According to Leo Vince USA, it is an in-line pre-silencer, straight through design.
Cheers,
MrHix
|
|
guywithfz10
Full Member
Posts: 218
Likes: 160
Registered: Sept 1, 2016 17:49:46 GMT -7
|
Post by guywithfz10 on Apr 13, 2017 11:29:08 GMT -7
I'm pretty sure its very loud for drivers and pedestrians around me but I don't really care much for them. I hate drivers here because they are always texting and driving and I can see them doing that in my mirrors so they can just suck it and enjoy my loud bike. hahaha you made me laugh pretty good I had a MIVV decat with the stock exhaust and it sounded good but was pretty loud. Decel pop was a sharp report. The Yoshi 3/4 I have now has a deeper tone, popping is greatly reduced and sounds like a deep boom, and overall a little quieter. Its still the loudest bike I've owned but I don't care. Most of the time I clutch in and rev the motor instead of using the horn. I asked Graves about the hideously long can on their decat exhaust ( Graves Decat Exhaust) when it first came out and they replied that the can had to be that long to get the sound levels down to the target demographic. I don't mind the Graves exhaust but I wish they had it in silver logo like on the R1 version. I'm personally not a fan of carbon exhaust cans. I think the design fits sport bikes very well but not so much for naked bikes. |
|
kup0236
Full Member
Posts: 178
Likes: 116
Registered: Nov 1, 2016 11:52:23 GMT -7
|
Post by kup0236 on Apr 13, 2017 12:48:37 GMT -7
Here's a picture of it. I like the way it looks and it sounds wicked.  |
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Apr 14, 2017 17:47:56 GMT -7
It contains a baffle, seems like its well made. Will get up pictures soon, there was a shipping delay.
|
|
tonysal
Full Member
Posts: 134
Likes: 74
|
Post by tonysal on Apr 20, 2017 10:21:41 GMT -7
fzwaffle,
any news on the shipping? eager to hear your thoughts on this exhaust...
regards, Tony |
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Apr 20, 2017 17:38:54 GMT -7
I haven't had time to get pictures, I do have it in hand. Super high quality, it is straight through small resonator. Ill get pictures up before and after I install it.
|
|
tonysal
Full Member
Posts: 134
Likes: 74
|
Post by tonysal on Apr 27, 2017 12:04:17 GMT -7
fzwaffle,
have you installed it yet? can you give us a rundown on how it sounds compared to stock?
regards, Tony |
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Apr 28, 2017 14:36:04 GMT -7
I havent had time to work on it or ride it  , Im planning to send out the ecu as well for the tune. Id give a guesstimate of a couple weeks before its on now. |
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Jun 1, 2017 17:41:49 GMT -7
Just installed it today, was very easy and fit perfect. Havent been able to get the sound clip, getting the ecu tuned first.  image sharing sites |
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Jul 13, 2017 16:59:23 GMT -7
Update: This thing is way loud with the current setup, I may go to a bigger muffler, but man does it sound good!
|
|
, Im planning to send out the ecu as well for the tune. Id give a guesstimate of a couple weeks before its on now.