maxxj
Junior Member
Posts: 61
Likes: 31
Registered: Jul 7, 2022 7:44:49 GMT -7
|
Post by maxxj on Mar 5, 2023 15:27:26 GMT -7
I've been on a few other bike specific forums over the years and none of them were as helpful as you all, haven't met any chodes on here yet either. Just wanted to thank this community for helping me figure out all of the odd stuff I was dealing with when I bought this bike from a guy that abused it with neglect while also keeping it in his living room. It had a lot of strange problems from ranging from out of place fasteners, bent peg brackets, to off center tag brackets. I almost have it exactly how I want it too, few more small things to do that I'm not in a hurry to get done.
|
|
Sponsored Ad
|
|
|
Post by mt10orc on Mar 5, 2023 20:02:14 GMT -7
Yes this board doesn’t have a bunch of know it all dickheads roaming around. It is the reason I keep coming back.
|
|
|
|
Post by RedAndBlack on Mar 5, 2023 23:40:56 GMT -7
Thank you for being easy to moderate  For real though, I've been on many motorcycle/car forums and this one has been by far the best. |
|
|
|
Post by willl84 on Mar 6, 2023 4:46:39 GMT -7
Yes this board doesn’t have a bunch of know it all dickheads roaming around. It is the reason I keep coming back. The was one but they seemed to have gone silent for a bit lol. Literally had a guy go all rage and literally threatened my life on a different forum (not bike related) because he said that anyone with a Prusa 3D printer was an elitest and it snowballed from there. |
|
Deleted
Posts: 0
Registered: Nov 21, 2024 6:13:11 GMT -7
|
Post by Deleted on Mar 6, 2023 7:35:47 GMT -7
Love this board.
I've been on a few boards where unless you were a faithful follower of AGATT you would practically be kicked off the board.
When I say AGATT I'm not talking about common sense gear I'm talking about full leathers all the time no matter where you were going or what you were doing.
|
|
|
|
Post by parthz8 on Mar 6, 2023 12:33:51 GMT -7
Agree 100% !! i am member of R1 forum also for my R1M but end up asking question, etc...here and not in any other forum. They are just not as friendly and useful...
|
|
superspirit
Full Member
Posts: 215
Likes: 86
Registered: Oct 2, 2017 14:59:43 GMT -7
|
Post by superspirit on Mar 6, 2023 16:34:31 GMT -7
This is a great forum, just a little too slow. But that's what keeps it clean. We had a real bad knowitall on here but he's left. Sad thing was I ran into him on a car forum and sure enough we butted heads there also. Since I put him on ignore on both forums Its been great.
|
|
|
|
Post by mt10orc on Mar 6, 2023 21:12:44 GMT -7
Agree 100% !! i am member of R1 forum also for my R1M but end up asking question, etc...here and not in any other forum. They are just not as friendly and useful... Feel exactly the same. Also a member at the R1 forum as well. Posted 4 or 5 times on the board. Too many hijacked threads there by the “know it all D heads” I was referencing to earlier. Don’t get me wrong there is some good people there but I use that board more for reading than interacting. Prefer our tight nit group we have here. 😎👍🙏 |
|
|
|
Post by mt10orc on Mar 6, 2023 21:15:22 GMT -7
Yes this board doesn’t have a bunch of know it all dickheads roaming around. It is the reason I keep coming back. The was one but they seemed to have gone silent for a bit lol. Literally had a guy go all rage and literally threatened my life on a different forum (not bike related) because he said that anyone with a Prusa 3D printer was an elitest and it snowballed from there. F that guy! Wish I had a 3D printer. |
|
|
|
Post by mt10orc on Mar 6, 2023 21:18:06 GMT -7
Love this board. I've been on a few boards where unless you were a faithful follower of AGATT you would practically be kicked off the board. When I say AGATT I'm not talking about common sense gear I'm talking about full leathers all the time no matter where you were going or what you were doing. It’s all about helping, sharing, and riding here. Because all that matters is happiness in life. No freaking rules to be a part of this group. Totally agree superspirt4 with the pace, but like u said it makes it a clean board. Have been lucky not to have any confrontations here. |
|
|
|
Post by willl84 on Mar 7, 2023 7:43:32 GMT -7
The was one but they seemed to have gone silent for a bit lol. Literally had a guy go all rage and literally threatened my life on a different forum (not bike related) because he said that anyone with a Prusa 3D printer was an elitest and it snowballed from there. F that guy! Wish I had a 3D printer. You can get an Ender 3 for $200 or less these days. Super easy to learn with too. If you've got a Microcenter close by you can get one for $99 with their coupon as well. |
|
|
|
Post by willl84 on Mar 7, 2023 7:45:02 GMT -7
This is a great forum, just a little too slow. But that's what keeps it clean. We had a real bad knowitall on here but he's left. Sad thing was I ran into him on a car forum and sure enough we butted heads there also. Since I put him on ignore on both forums Its been great. Forums in general have slowed a lot since Facebook groups became a thing. |
|
|
|
Post by mt10orc on Mar 7, 2023 14:57:43 GMT -7
Not a fan of Fakebook.
|
|
superspirit
Full Member
Posts: 215
Likes: 86
Registered: Oct 2, 2017 14:59:43 GMT -7
|
Post by superspirit on Mar 7, 2023 17:25:32 GMT -7
I don't do any social media outside of forums. I like my privacy.
|
|
|
|
Post by mt10orc on Mar 7, 2023 23:55:11 GMT -7
I don't do any social media outside of forums. I like my privacy. Spot on!!! |
|
|
|
Post by willl84 on Mar 8, 2023 8:06:53 GMT -7
Me either. I deactivated my account like 6 years ago and just reactivated it this past summer to list that TLS I have for sale on Marketplace. Found a coupl eMT groups though in addition to some 3D printing groups. Don't use it outside of those though. |
|
