spartanadv
Full Member
Posts: 163
Likes: 104
Registered: Nov 30, 2016 19:55:37 GMT -7
|
Post by spartanadv on Dec 6, 2016 21:26:59 GMT -7
Over the past couple of days I've been talking to Roger at Watsen Design about making some parts for the FZ10 and he's onboard! I have some information to get for him and we should be good to go! I'll keep you all up to date as to the progress. It's going to be amazing! If you aren't familiar with the company, I highly suggest you look them up, read reviews, and admire their work on people's bikes via google images.
|
|
Sponsored Ad
|
|
|
Post by tigershark on Dec 6, 2016 21:33:28 GMT -7
Familiar with them from FZ-09. Clean, discreet products, but pretty pricey.
|
|
spartanadv
Full Member
Posts: 163
Likes: 104
Registered: Nov 30, 2016 19:55:37 GMT -7
|
Post by spartanadv on Dec 6, 2016 21:43:06 GMT -7
Familiar with them from FZ-09. Clean, discreet products, but pretty pricey. My experience has been; buy quality products from a reputable company, and you wont have to buy that part again. The look and quality is what sold me. |
|
|
|
Post by Cruizin on Dec 6, 2016 21:57:37 GMT -7
Over the past couple of days I've been talking to Roger at Watsen Design about making some parts for the FZ10 and he's onboard! I have some information to get for him and we should be good to go! I'll keep you all up to date as to the progress. It's going to be amazing! If you aren't familiar with the company, I highly suggest you look them up, read reviews, and admire their work on people's bikes via google images. We have openings in our vendor program! |
|
spartanadv
Full Member
Posts: 163
Likes: 104
Registered: Nov 30, 2016 19:55:37 GMT -7
|
Post by spartanadv on Dec 6, 2016 22:03:31 GMT -7
Over the past couple of days I've been talking to Roger at Watsen Design about making some parts for the FZ10 and he's onboard! I have some information to get for him and we should be good to go! I'll keep you all up to date as to the progress. It's going to be amazing! If you aren't familiar with the company, I highly suggest you look them up, read reviews, and admire their work on people's bikes via google images. We have openings in our vendor program! Once I send him what he asked for, I'll tell him. I'm sure he would see the advantage of getting in on the ground floor. |
|
|
|
Post by Cruizin on Dec 6, 2016 22:20:34 GMT -7
Our vendors do well, I email
Blast and social media blast when they have member only sales and the results are usually very good!
|
|
spartanadv
Full Member
Posts: 163
Likes: 104
Registered: Nov 30, 2016 19:55:37 GMT -7
|
Post by spartanadv on Dec 6, 2016 22:31:31 GMT -7
I'm sure he'll love that. Maybe I should invest in companies before I get them on here. Lol. I'll stick to the fun and let them have the money. I shot an email to another company tonight as well. We will see if they will be up for making some parts as well. I'm on a mission to flood all the companies that make quality parts! More companies, more parts, and competition will be wonderful.
|
|
Deleted
Posts: 0
Registered: Nov 21, 2024 5:08:56 GMT -7
|
Post by Deleted on Dec 7, 2016 4:52:19 GMT -7
His products are quality built. The LEDs are very bright too.
|
|
|
|
Post by slv on Dec 7, 2016 6:08:26 GMT -7
Familiar with them from FZ-09. Clean, discreet products, but pretty pricey. My experience has been; buy quality products from a reputable company, and you wont have to buy that part again. The look and quality is what sold me. This is true. I've had a lot of bikes over the last several years. I was looking for cheaper options early on, but I ended up replacing them with higher quality items. This includes riding gear. I'm now trying to make a conscious effort to find the right parts and buying once. The Hindle Exhaust is on my radar now for example. Is it up to par with the Acro? I don't know yet, but I'm holding fast to the idea of research and good decisions. Off to the Watsen site..... |
|
Deleted
Posts: 0
Registered: Nov 21, 2024 5:08:56 GMT -7
|
Post by Deleted on Dec 7, 2016 6:24:34 GMT -7
The biggest hurdle will be designing it to be seen from out and around the two covers. I'm would almost bet he could use the current FZ09 model he has and just design a spacer of some kind. We will see.
Also.....for those who end up ordering these, please be patient with the process. Most of these are made on a per order basis.
Worth the wait.
|
|
spartanadv
Full Member
Posts: 163
Likes: 104
Registered: Nov 30, 2016 19:55:37 GMT -7
|
Post by spartanadv on Dec 7, 2016 20:11:07 GMT -7
The biggest hurdle will be designing it to be seen from out and around the two covers. I'm would almost bet he could use the current FZ09 model he has and just design a spacer of some kind. We will see. Also.....for those who end up ordering these, please be patient with the process. Most of these are made on a per order basis. Worth the wait. Agreed. I've heard 2 1/2 month wait after the order. Good things are worth waiting for! I'd expect he may go a different route with design as not to be repetitive. I'm extremely excited to see how it turns out! |
|
