Deleted
Posts: 0
Registered: Dec 3, 2024 12:22:44 GMT -7
|
Post by Deleted on Dec 4, 2016 12:44:43 GMT -7
|
|
Sponsored Ad
|
|
Post by tigershark on Dec 4, 2016 14:27:01 GMT -7
Mine is on order and delivery was just moved forward to tomorrow. Getting the smoke color option. Should have pictures up very soon.
|
|
|
Post by clayton on Dec 4, 2016 16:56:23 GMT -7
Really like the looks of dat windscreen.
|
|
coyote
Full Member
Posts: 129
Likes: 110
Registered: Aug 3, 2016 20:30:29 GMT -7
|
Post by coyote on Dec 4, 2016 17:11:06 GMT -7
Really like the looks of dat windscreen. I think its the best looking option for anyone that wants to ad a windscreen to the -10. If i ever felt the need for a windscreen i would go for that one.
|
|
|
Post by 0002s on Dec 4, 2016 18:46:18 GMT -7
Tiger, give us a review when your weather breaks.
|
|
kup0236
Full Member
Posts: 178
Likes: 116
Registered: Nov 1, 2016 11:52:23 GMT -7
|
Post by kup0236 on Dec 4, 2016 18:53:41 GMT -7
I'm interested in getting one of these too. Let us know how you like it.
|
|
|
Post by tigershark on Dec 4, 2016 21:37:50 GMT -7
Absolutely. Be nice to get a few warm days this month yet. I've had New Years Day rides in the past.
|
|
|
Post by arcaos84 on Dec 5, 2016 7:09:10 GMT -7
I'm on the fence. The only thing throwing me off is what looks like padding around the top edge.
**Edit: Also looks like it would make it more difficult to clean the bugs in the nooks and crannies.
|
|
|
Post by tigershark on Dec 5, 2016 8:59:27 GMT -7
Some posters on FZ09 actually added that trim strip to their screen claiming it smoothed out air flow? MRA seems to know what they're doing, so that may be the case.
|
|
|
Post by tigershark on Dec 5, 2016 12:49:57 GMT -7
MRA smoke colored screen arrived today. Mounting was simple with all original parts staying on the bike except the mounting bolts which are too short. Note that these were barely finger tight when I removed them. It would be wise for all of you to check these for proper torque. I have a minor clearance issue. My handguards make contact with the upper edge of the screen about 1/2" prior to full turn lock on both sides. Fortunately the guards are free floating where they hit and flex with very little force. There is no issue whatsoever regarding safety or control. If you have guards that are rigidly mounted on both ends, this could be a problem. The smoke is a little light in color, but I prefer it over clear or opaque black. Also note, the black trim edge tube can be left off or removed or replaced easily. There's a small metal pinch clip that you squeeze onto each end to hold it in place during riding. Good instructions with good illustrations. As posted before, MRA is one of the only ones made of shatterproof material. They will break leaving clean, smooth edges versus sharp jagged breaks occurring with most other brands. This is described on their site and I've read forum threads showing pictures that attest to this. With ice and snow on the roads, my test ride will have to wait. I'd rather not provide first hand crash results. The next decent day that comes along, I'll take a spin and post my review. Pictures:
|
|
Deleted
Posts: 0
Registered: Dec 3, 2024 12:22:44 GMT -7
|
Post by Deleted on Dec 5, 2016 13:11:29 GMT -7
Nice!!! I will have to check it out in person at the Spring Slimey Crud Run :-)
|
|
|
Post by tigershark on Dec 5, 2016 14:38:49 GMT -7
Nice!!! I will have to check it out in person at the Spring Slimey Crud Run :-) There ya go!
|
|
|
Post by clayton on Dec 5, 2016 20:13:21 GMT -7
That looks really awesome on your bike. Hope it deflects the wind good for ya!
|
|
|
Post by tigershark on Dec 5, 2016 22:20:06 GMT -7
Thanks Clayton. I hope it works too.
|
|
|
Post by slv on Dec 6, 2016 4:41:27 GMT -7
I like that. It sets straighter up than I expected, but the height is still low enough to keep the lines of the bike.
|
|
|
Post by 0002s on Dec 6, 2016 8:53:32 GMT -7
It has an interesting side profile view.
|
|
|
Post by tigershark on Dec 6, 2016 11:38:58 GMT -7
Test ride with new MRA sport screen complete.
How many screens has everyone bought that were any great shakes? Very few? Same here.
Unfortunately, I'm not overly impressed. I always have said screens don't block the wind, they just move it somewhere else. I can't even really say that here. I really couldn't feel a whole lot of difference. It was cold at just above freezing out, but less than 5 mph wind. Pretty good test condition. Windy days can be very misleading. Without the screen, if I duck down about 6", it's a fair amount calmer and quieter. With the MRA, there's no change from upright to tucked down. So, possibly a little better sitting upright, but not much. I'm 6' tall with a 32" inseam for comparison, but I sat up as high as I could to full tuck. Bottom line is there is little, if any measureable difference up to 100 mph. I took it to 125 mph and there was a fair amount of wind shear on my upper body. Was it less than without the MRA? I think so. Sitting upright without it takes more effort to hold on. It pulls on the body pretty hard though with the screen.
I plan to keep it and do more tests in the spring. If I went into buying it knowing how it performs, I wouldn't get one. I have been so impressed with the performance of the factory spoiler. If it didn't work as well as it does, the MRA may end up being a huge improvement. But the spoiler does work and it's hard to get a lot of improvement over that. The FZ-10 is a naked bike, so expecting calm, quiet air isn't realistic. My advice? Save your money and enjoy the FZ-10 just the way it is. If you tour long distances and ride in the rain, get yourself a giant barn door screen that will give you some serious protection. Otherwise keep it stock.
In spite of everything else, it was a glorious ride. I would have gone farther, but ice on the road ahead forced me to quit. Gonna be a long winter here.
|
|
kup0236
Full Member
Posts: 178
Likes: 116
Registered: Nov 1, 2016 11:52:23 GMT -7
|
Post by kup0236 on Dec 6, 2016 18:25:58 GMT -7
Thanks for the review. I think I'll keep it stock until a better solution comes out
|
|
|
Post by slv on Dec 6, 2016 18:31:24 GMT -7
Thanks for the review. I think I'll keep it stock until a better solution comes out Me too. Thanks for for the review tigershark
|
|
|
Post by 0002s on Dec 7, 2016 6:42:39 GMT -7
Bummer. Hope further testing leads to better results.
|
|