darrin
New Member
Posts: 5
Likes: 2
Registered: Jan 27, 2022 15:26:39 GMT -7
|
Post by darrin on Jan 28, 2022 11:06:03 GMT -7
Whats the concensus (if there is 1) on which link pipe to buy? $600+ Akra seems a bit much. Read about some fitment issues with the Dan moto? How bout Leo V? Plan to run the stock muffler
|
|
Sponsored Ad
|
Deleted
Posts: 0
Registered: Nov 21, 2024 7:20:40 GMT -7
|
Post by Deleted on Jan 28, 2022 13:13:24 GMT -7
Dan moto is what I have. The fitment was off where it bolts to the frame in the middle.
Once I got it on the pipe is just fine and it was cheap too.
I wanted to get the Leo V but they were always sold out everywhere.
Piss on the overpriced Akra, all you are paying for is mostly name and sponsorships.
|
|
terrys
Full Member
Posts: 114
Likes: 89
Registered: Mar 1, 2021 0:48:28 GMT -7
|
Post by terrys on Jan 28, 2022 15:55:00 GMT -7
No issues fitting the Leovince to my MT; everything lines up nicely.
|
|
|
|
Post by willl84 on Jan 31, 2022 10:01:51 GMT -7
Piss on the overpriced Akra, all you are paying for is mostly name and sponsorships. Also Titanium |
|
Deleted
Posts: 0
Registered: Nov 21, 2024 7:20:40 GMT -7
|
Post by Deleted on Jan 31, 2022 11:25:07 GMT -7
Piss on the overpriced Akra, all you are paying for is mostly name and sponsorships. Also Titanium True. For me other than looks Titanium is not really beneficial for such a small piece of pipe. If I was doing a full system I'd go all Titanium. |
|
chipmonk
Junior Member
Posts: 97
Likes: 82
Registered: Oct 9, 2018 9:08:36 GMT -7
|
Post by chipmonk on Feb 2, 2022 14:52:07 GMT -7
With the akrapovic you are paying for a proper fitting pipe that is titanium. I would rather pay more for a quality part than $300 for a stainless steel pipe that kinda fits and doesn't follow the bikes under body lines right.
|
|
Deleted
Posts: 0
Registered: Nov 21, 2024 7:20:40 GMT -7
|
Post by Deleted on Feb 3, 2022 7:32:10 GMT -7
With the akrapovic you are paying for a proper fitting pipe that is titanium. I would rather pay more for a quality part than $300 for a stainless steel pipe that kinda fits and doesn't follow the bikes under body lines right. I understand some of what you are saying but its not like the Dan Moto is bad. The welds are good and it follows the lines of the bike great. Done a whole season of track days, 2 800 mile trips on it, and never had to make a single adjustment. Plus I saved $600 to put into other parts like: chain and sprockets, levers, seat, tank grips, etc... |
|
chipmonk
Junior Member
Posts: 97
Likes: 82
Registered: Oct 9, 2018 9:08:36 GMT -7
|
Post by chipmonk on Feb 3, 2022 11:40:43 GMT -7
With the akrapovic you are paying for a proper fitting pipe that is titanium. I would rather pay more for a quality part than $300 for a stainless steel pipe that kinda fits and doesn't follow the bikes under body lines right. I understand some of what you are saying but its not like the Dan Moto is bad. The welds are good and it follows the lines of the bike great. Done a whole season of track days, 2 800 mile trips on it, and never had to make a single adjustment. Plus I saved $600 to put into other parts like: chain and sprockets, levers, seat, tank grips, etc... I totally get the savings. That's why there are so many options out there. Everyone has different opinions on mods. The akra pipe can be had for 550 and the old dan moto pipes were going for about 200 so really you're saving 350. Still a good chunk of change. Im a sucker for titanium and carbon fiber bits so maybe thats why i went for it LOL. |
|
|
|
Post by willl84 on Feb 4, 2022 10:00:22 GMT -7
I understand some of what you are saying but its not like the Dan Moto is bad. The welds are good and it follows the lines of the bike great. Done a whole season of track days, 2 800 mile trips on it, and never had to make a single adjustment. Plus I saved $600 to put into other parts like: chain and sprockets, levers, seat, tank grips, etc... I totally get the savings. That's why there are so many options out there. Everyone has different opinions on mods. The akra pipe can be had for 550 and the old dan moto pipes were going for about 200 so really you're saving 350. Still a good chunk of change. Im a sucker for titanium and carbon fiber bits so maybe thats why i went for it LOL. I wanted the Ti but with factory SS headers it looks funny. I got the hindle full system with the carbon/carbon can and it's great www.sportbiketrackgear.com/hindle-yamaha-fz-10-2017-evolution-3-4-exhaust-system/Definitely thinking about finding a set of Ti R1 headers though and then getting the Akra link pipe. Might be better off just getting the full Ti Graves system instead lol www.gravesport.com/products/graves-motorsports-yamaha-fz10-mt-10-full-titanium-exhaust.html |
|
helipilotmt10r
Junior Member
Posts: 58
Likes: 68
Registered: Feb 4, 2021 10:43:10 GMT -7
|
Post by helipilotmt10r on Feb 5, 2022 23:22:53 GMT -7
I wanted the purple of the Titanium so I went Akrapovic. I am shopping for an R1M ti Header! Love the purple! If you want to save $ check out Blackwidow exhaust in the UK! Super nice and cheap.
|
|
chipmonk
Junior Member
Posts: 97
Likes: 82
Registered: Oct 9, 2018 9:08:36 GMT -7
|
Post by chipmonk on Feb 9, 2022 8:02:18 GMT -7
I paid $350 for my r1 header on ebay. I sanded it with 320 grit sand paper and it colored nice. Im pulling it and going to sand it it in steps down to 2000 and polish it now.   |
|
|
|
Post by mt10orc on May 11, 2022 19:41:22 GMT -7
Leo-Vince has my vote for decat delete. You can use your stock can or any other slip on.
|
|
