vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Feb 20, 2021 13:59:14 GMT -7
Was changing out my link pipe for a leovince decat, when I tried putting on the slip on it wouldn't line up with the link pipe even though it's specced to work. I tried taking apart the clamp but it kinda fell in 3 pieces, and I smushed the little papery ring thing on the bottom of this pic i.imgur.com/uw3Gzv3.jpgI can't for the life of me figure out how to put it back. has been sitting in my garage for a month since its been cold as fuck in Chicago and I've been lazy. Any suggestions on the order of the clamp rings and how to get the slip-on to align with the pipes would be appreciated. Do I need to loosen all the bolts first? Here is a pic of how it aligns i.imgur.com/TG8e1DV.jpg |
|
|
|
Post by mindcrime79 on Feb 22, 2021 13:11:27 GMT -7
Without being able to see much of say twist the pipes it order to make them work with each other and line up all the appropriate fasteners.
It looks like you may have deformed the gaskets which you can either attempt to reuse or get new ones.
I'd also advise asking customer service from the manufacturer as they make the guarantee for the fitment.
|
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Feb 22, 2021 19:29:54 GMT -7
Without being able to see much of say twist the pipes it order to make them work with each other and line up all the appropriate fasteners. It looks like you may have deformed the gaskets which you can either attempt to reuse or get new ones. I'd also advise asking customer service from the manufacturer as they make the guarantee for the fitment. I deformed the gaskets definitely. You know where you can order new ones ? |
|
|
|
Post by mindcrime79 on Feb 22, 2021 19:38:28 GMT -7
If it's specific to the exhaust you will have to ask the manufacturer. Otherwise I'm sure something generic exists at a muffler shop or motorcycle parts place.
|
|
