mikem73
Junior Member
Posts: 53 
Likes: 20
|
Post by mikem73 on Oct 18, 2018 17:12:46 GMT -7
I have used these guys in the past and they offer some very good products! Best thing is they mostly design and sell their own parts the more the demand the more they can offer for our bikes and their prices are really fair! If your looking for something consider giving them a try I am in no way affiliated with these guys just wanted to add a good cheap option for all. tstindustries.com/Yamaha-FZ-10-MT-10-2016-/ |
|
Sponsored Ad
|
|
|
Post by clayton on Oct 18, 2018 18:52:21 GMT -7
I have used these guys in the past and they offer some very good products! Best thing is they mostly design and sell their own parts the more the demand the more they can offer for our bikes and their prices are really fair! If your looking for something consider giving them a try I am in no way affiliated with these guys just wanted to add a good cheap option for all. tstindustries.com/Yamaha-FZ-10-MT-10-2016-/I have there fender eliminator and frame sliders. There awesome |
|
panzer716
Junior Member
Posts: 69
Likes: 26
Registered: Jun 10, 2018 11:28:53 GMT -7
|
Post by panzer716 on Oct 18, 2018 20:36:04 GMT -7
I had an integrated tail light on my FZ-07 from them. Best one IMO on the market. I really wish they would make one for the FZ-10 cause I'd be all over that.
|
|
|
|
Post by achrista on Oct 18, 2018 20:40:37 GMT -7
I had their fender eliminator on my R6 and it was quality. it was a very good part for the $.
|
|
mikem73
Junior Member
Posts: 53
Likes: 20
|
Post by mikem73 on Oct 21, 2018 11:07:33 GMT -7
I had an integrated tail light on my FZ-07 from them. Best one IMO on the market. I really wish they would make one for the FZ-10 cause I'd be all over that. If you go on their website and look at the 2014-2016 FZ09 That is the same tail light Our FZ10s use they have one! May want to call and verify the plugins are the same first too Yamaha is notorious for using past parts in new builds! |
|
panzer716
Junior Member
Posts: 69
Likes: 26
Registered: Jun 10, 2018 11:28:53 GMT -7
|
Post by panzer716 on Oct 21, 2018 12:57:28 GMT -7
I had an integrated tail light on my FZ-07 from them. Best one IMO on the market. I really wish they would make one for the FZ-10 cause I'd be all over that. If you go on their website and look at the 2014-2016 FZ09 That is the same tail light Our FZ10s use they have one! May want to call and verify the plugins are the same first too Yamaha is notorious for using past parts in new builds! I've heard this but I wasn't sure if it was true. Has anyone here done this with success? I also figured if it was that easy for them to just use the same part they would sell it as a FZ-09/FZ-10 integrated tail light. I figured something must be different if they haven't just labeled it like that already. |
|
mikem73
Junior Member
Posts: 53
Likes: 20
|
Post by mikem73 on Oct 21, 2018 13:32:14 GMT -7
Call them Monday or shoot an email they have a timely response!
|
|
dnozzle
Junior Member
Posts: 96
Likes: 64
Registered: Jan 16, 2019 7:11:21 GMT -7
|
Post by dnozzle on Jan 16, 2019 9:22:14 GMT -7
Anyone ever find out if the 14-16 FZ09 tst tail light is direct fit for the fz/mt10's?
|
|
Deleted
Posts: 0
Registered: Nov 21, 2024 14:49:36 GMT -7
|
Post by Deleted on Jan 16, 2019 12:04:30 GMT -7
I also figured if it was that easy for them to just use the same part they would sell it as a FZ-09/FZ-10 integrated tail light. They might not know it's compatible either  . All the passenger peg eliminators I've seen were designed for the MT-09, but since somebody noticed the spacing is the same on FZ/MT-10s, are being sold as such, but they don't fit perfectly, like they do on MT-09s... but close enough (I bought the Evotechs, but installed them both inside-out and upside-down). I wouldn't doubt one bit the taillight connectors are the same IF they look the same. Only one way to find out: somebody has to try it . I'm sure TST would agree to refund all fees if somebody is willing to try it out and it doesn't fit. They'd increase their sales a lot, so it wouldn't hurt to ask them. I'd say yes. He he. Good luck. |
|
dnozzle
Junior Member
Posts: 96
Likes: 64
Registered: Jan 16, 2019 7:11:21 GMT -7
|
Post by dnozzle on Jan 16, 2019 14:04:25 GMT -7
Actual Conversation with TST:
"We've tested fitment on the FZ-10 but the "tail light shroud" on the OEM unit prevents proper fitment. If we're able to secure a local FZ-10 we may be able to design a solution for that bike. If any local riders in FL are willing to lend us their bike for two days we can probably design a fix, film an installation video, and they'd get the products free of charge."
- So if anyone knows anyone in FL; there ya go.
|
|
panzer716
Junior Member
Posts: 69
Likes: 26
Registered: Jun 10, 2018 11:28:53 GMT -7
|
Post by panzer716 on Jan 17, 2019 6:32:48 GMT -7
Actual Conversation with TST: "We've tested fitment on the FZ-10 but the "tail light shroud" on the OEM unit prevents proper fitment. If we're able to secure a local FZ-10 we may be able to design a solution for that bike. If any local riders in FL are willing to lend us their bike for two days we can probably design a fix, film an installation video, and they'd get the products free of charge." - So if anyone knows anyone in FL; there ya go. Great info. We need to spam this until a Florida FZ-10 rider complies. Haha |
|
mastiff71
New Member
Posts: 14
Likes: 5
Registered: Nov 17, 2018 16:51:57 GMT -7
|
Post by mastiff71 on Jan 17, 2019 22:20:29 GMT -7
The connections on the MT-09 and MT-10 are different.
|
|
. All the passenger peg eliminators I've seen were designed for the MT-09, but since somebody noticed the spacing is the same on FZ/MT-10s, are being sold as such, but they don't fit perfectly, like they do on MT-09s... but close enough (I bought the Evotechs, but installed them both inside-out and upside-down). I wouldn't doubt one bit the taillight connectors are the same IF they look the same. Only one way to find out: somebody has to try it