djstraub
New Member
Posts: 33
Likes: 3
Registered: Jan 29, 2018 17:03:58 GMT -7
|
Post by djstraub on Aug 8, 2018 7:18:44 GMT -7
|
|
djstraub
New Member
Posts: 33
Likes: 3
Registered: Jan 29, 2018 17:03:58 GMT -7
|
Post by djstraub on Nov 5, 2018 16:24:38 GMT -7
Price drop
|
|
Deleted
Posts: 0
Registered: Nov 21, 2024 9:58:50 GMT -7
|
Post by Deleted on Nov 5, 2018 21:47:05 GMT -7
Hey, are they front only, or front and rear? The link you provided says front above, but shows front and rear on the picture (7 pieces), and also says 'front and rear' on the description below. How many pieces on your kit? Haven't scrutinize my bike yet, but really doubt there're 7 lines for the front only. My guess is there's 1 from MC to ABS, another from ABS to the 'Y', plus 2 more to the front calipers, so a total of 4, no? And 3 for the rear. Or maybe 5 and 2. If for both sides, might jump on it, but not sure I want to mess with my brand new bike like that yet. Don't have the equipment to fill the system from the callipers first, and to cycle the ABS pump, to avoid massive air bubbles. But if it's front and rear, you should sell it much easier. Bump for you  . Good luck. |
|
panzer716
Junior Member
Posts: 69
Likes: 26
Registered: Jun 10, 2018 11:28:53 GMT -7
|
Post by panzer716 on Nov 6, 2018 5:24:50 GMT -7
PM'd.
|
|
revolvingrain
Junior Member
Posts: 62
Likes: 17
Registered: Nov 15, 2017 12:14:29 GMT -7
|
Post by revolvingrain on Nov 6, 2018 6:16:24 GMT -7
Do these work with the R1 Master Cylinder?
|
|
djstraub
New Member
Posts: 33
Likes: 3
Registered: Jan 29, 2018 17:03:58 GMT -7
|
Post by djstraub on Nov 6, 2018 16:08:40 GMT -7
Sold
|
|
. Good luck.
