myprixxx
New Member
Posts: 11
Registered: Apr 6, 2018 19:17:03 GMT -7
|
Post by myprixxx on Apr 25, 2018 18:51:44 GMT -7
I have the Graves cat delete system (bought used) and the y pipe came all boogered up. I have it half rigged on there but it's not up to par with what I want it to look like. Are there any other mid pipes that will line up with this can? It's the long can without the exhaust valve. Graves wants 800 bucks for the mid pipe only and I'm trying to decide if it's worth buying the mid pipe or going with another system like the hindle. For ~200 bucks less
|
|
bigweb2001
New Member
Posts: 34
Likes: 13
Registered: Jan 8, 2017 10:00:06 GMT -7
|
Post by bigweb2001 on May 4, 2018 7:28:06 GMT -7
You can call Graves and send the y pipe back in to get reworked. If the y pipe was off of an R1, they need to deepen the 2 flanges that connect to the header pipes in order for the bolt to correctly line up on the MT10
|
|
myprixxx
New Member
Posts: 11
Registered: Apr 6, 2018 19:17:03 GMT -7
|
Post by myprixxx on May 5, 2018 1:21:00 GMT -7
You can call Graves and send the y pipe back in to get reworked. If the y pipe was off of an R1, they need to deepen the 2 flanges that connect to the header pipes in order for the bolt to correctly line up on the MT10 That's interesting, I'll send them an email and see if that's an option. (although I doubt they'll want to take that on the guy in bought it from added his own holes for factory O2 sensors and then cut down the flange even more. Didn't think about it having been a y pipe from an R1 that actually makes a lot of sense. Thanks! I may end up having to swap over to the evs system anyway, I just ordered a set of givi bags for riding to and from work and im thinking this Graves system may be too tall even though I love the pipe |
|
