blake13
New Member
Posts: 2 
Likes: 1
|
Post by blake13 on Sept 7, 2017 16:39:27 GMT -7
Picked up a used fz10 with 4k miles, full exhaust, tune, screen, quick shifter, ext for 10k. Insanely happy with this bike already. I posted in another thread about them pulling hard to the right when taking hands off the bars. All the other bike I've had have done this to an extent, but not nearly as dramatic as this bike. Any ideas on a fix other than the obvious I.E. looking at the axle blocks. I'm going to use string to check the alignment from the front.
|
|
roninser
Junior Member
Posts: 55
Likes: 33
Registered: Jun 30, 2017 6:32:22 GMT -7
|
Post by roninser on Sept 7, 2017 16:47:42 GMT -7
Congrats!!
And I would def say rear axle adjustment on the pulling. I have aftermarket adjusters and use a vernier caliper still lol.
|
|
|
|
Post by 0002s on Sept 8, 2017 17:26:27 GMT -7
Congrats and welcome to the forum.
|
|
av8er
Junior Member
If my bike could travel at the speed of light, would my headlights work?
Posts: 73
Likes: 49
Registered: Jun 21, 2017 1:47:08 GMT -7
|
Post by av8er on Sept 9, 2017 3:55:15 GMT -7
Welcome to the Forum and Congrats on the find. A number of people had had similar problems with a slight pull including me. I found that the adjustment marks were slightly off on mine (about a half) and when properly adjusted it tracks perfectly now. The after market adjusters as suggested from roninser seems to be easier to calibrate. Swingarm on the R1 must be different, I don't have any issues with the marks.
|
|
