brian
New Member
Posts: 3 
Likes: 2
|
Post by brian on Jul 19, 2017 13:39:00 GMT -7
what is everyone's rev limiter kickin in at ?? I believe mine is 11.5 or so , and my fuel gauge sucks ! 98 miles on my new rig ! waiting for my A M stuff to arrive .
|
|
av8er
Junior Member
If my bike could travel at the speed of light, would my headlights work?
Posts: 73
Likes: 49
Registered: Jun 21, 2017 1:47:08 GMT -7
|
Post by av8er on Jul 20, 2017 14:11:10 GMT -7
You can raise your limiter a bit it you dare. Flashing software such as Flash tune or Woolichs or by sending your ECU to a vendor. Lots of info here about that. I can't say I have a real problem with the fuel guage. The first tank burned is when I found out that the first bar go's away when the tank is half full and the next at 1/2. When the trip meter switches to fuel, you have a bit less than a gallon. We all know about how far that doesn't go. That could be better but the guage for me is fine.
|
|
|
|
Post by RedAndBlack on Jul 20, 2017 14:32:58 GMT -7
coming from a 600 Sportbike that Peak Torque and HP is at 13k, I've bounced her off the rev limiter a few times. I think its in that area of 12k.
I personally wouldn't mess with it. Torque and HP basically start to fall off after 10k so think of that rev limiter as a dummy light to tell you to shift.
|
|
grant123
New Member
Posts: 30
Likes: 15
Registered: Aug 20, 2016 10:53:30 GMT -7
|
Post by grant123 on Jul 21, 2017 7:59:22 GMT -7
Got mine set to 12,500.
Rarely run into it but its nice to know i can rev it out a little if i wish
|
|
kingcrimson
Junior Member
Posts: 94
Likes: 22
|
Post by kingcrimson on May 4, 2018 10:35:59 GMT -7
On my '17FZ-10 it tops out at 13,500 after my ECU re-program (new Dyno PCV mapping).
I 've no issues with the gas and it's associated meter as my Roxie tops out at ~165hp; I always use my trip meter zeroed out at the start of every ride and begin to hunt down a filling station at 100mi. This way I know that I have ~30mi of reserve left. |
|
slipwrist
Junior Member
Posts: 60
Likes: 16
Registered: Aug 23, 2022 15:03:56 GMT -7
|
Post by slipwrist on Mar 18, 2023 23:37:13 GMT -7
13,500rpm's on a mt10, I don't think so bud. Jeez, I guess it's just safe to say there guys in here that don't know 💩, and obviously think the rest of us don't either.
|
|
|
|
Post by RedAndBlack on Mar 19, 2023 12:07:58 GMT -7
Why are you bumping a 6 year old thread to engage a banned person?
Locked.
|
|
