Deleted
Posts: 0
Registered: Apr 26, 2024 20:33:44 GMT -7
|
Post by Deleted on Jun 21, 2017 4:30:15 GMT -7
Just a couple minor mods here.
    |
|
Sponsored Ad
|
|
|
Post by arcaos84 on Jun 21, 2017 6:51:18 GMT -7
wow, just wow. If only the swing arm was black... but damn, the bike looks mean and sexy.
|
|
|
|
Post by clayton on Jun 21, 2017 7:02:25 GMT -7
Looks bad ass!!! love the red. I personally would like to see the red with silver motor and sliver frame to match the swingarm
|
|
|
|
Post by Cruizin on Jun 21, 2017 8:29:16 GMT -7
That bike is freakin sick! What's the story on that? Who owns it?
|
|
fzwaffle
Junior Member
Posts: 88
Likes: 57
Registered: Apr 3, 2017 9:50:38 GMT -7
|
Post by fzwaffle on Jun 21, 2017 9:35:23 GMT -7
Wow.... Makes me want to play with vinyl wrap.
EDIT: Just noticed how much bigger the rad and oil cooler are, also the swing arm says r1. Is there a significant difference between ours and the r1?
|
|
Deleted
Posts: 0
Registered: Apr 26, 2024 20:33:44 GMT -7
|
Post by Deleted on Jun 21, 2017 9:35:36 GMT -7
That bike is freakin sick! What's the story on that? Who owns it? Klein Yamaha out of Germany www.motorradklein.de |
|
|
|
Post by 0002s on Jun 21, 2017 9:47:30 GMT -7
I want to know what link pipe they used.
|
|
Deleted
Posts: 0
Registered: Apr 26, 2024 20:33:44 GMT -7
|
Post by Deleted on Jun 21, 2017 10:06:19 GMT -7
|
|
mother
Junior Member
Posts: 63 
Likes: 45
|
Post by mother on Jun 21, 2017 10:27:55 GMT -7
I want to know what link pipe they used. The Scorpion link pipe for the R1 is two piece like that, but the bends look different... Maybe SC Project is coming out with this one soon and these guys got an early one or a prototype. Or it could always be a one off. |
|
harrybalzak
Junior Member
Posts: 67
Likes: 62
Registered: Mar 2, 2017 11:17:12 GMT -7
|
Post by harrybalzak on Jun 21, 2017 13:03:49 GMT -7
I'd just like to know if they were able to map out the shitty on off throttle response. I like my bike except for the fueling. It's always been noticeable around here where there are no corners, but I took it to East Tennessee and N. Georgia last week and it absolutely killed me in the corners, I traded with another rider who had the BMW S1000R and it was so much nicer, almost no engine braking and the fueling was buttery smooth. I also thought the handling was much more nimble and neutral feeling. He hated the fuel cut off on the FZ10 as well. So sad that Yamaha can't get their shit together on their fueling issues.
|
|
bazsyr1
New Member
Posts: 1
Registered: Apr 18, 2021 0:32:17 GMT -7
|
Post by bazsyr1 on Apr 18, 2021 0:38:07 GMT -7
Its a German guy. Builds mainly Yamaha's. This one was in one of UK motorcycle magazine. He made a lot of mods on it. R1 swing arm. Lot mods to the engine. If I remember correct it something like 200hp on the back wheel.
|
|
|
|
Post by rracerfz10 on Apr 29, 2021 10:49:26 GMT -7
I'd just like to know if they were able to map out the shitty on off throttle response. I like my bike except for the fueling. It's always been noticeable around here where there are no corners, but I took it to East Tennessee and N. Georgia last week and it absolutely killed me in the corners, I traded with another rider who had the BMW S1000R and it was so much nicer, almost no engine braking and the fueling was buttery smooth. I also thought the handling was much more nimble and neutral feeling. He hated the fuel cut off on the FZ10 as well. So sad that Yamaha can't get their shit together on their fueling issues. Send your ECU to 2 Wheel Dyno Works. They have a tune for a stock bike that fixes that problem and they offer lifetime free reflashes so if you do mod your bike later on there's no charge to remap for them. |
|
redlinez
Full Member
Posts: 154
Likes: 36
Registered: Apr 17, 2021 19:54:28 GMT -7
|
Post by redlinez on Apr 29, 2021 12:52:18 GMT -7
Mine has the 2WDW flash and the throttle is like an on off switch with the slightest movement. They did do it for the prior owner in Dec 2017, maybe they've improved on it since then. I've been told the G2 helps, this seems to be quite common on a bunch of late model Japanese bikes. Maybe most Euro compliant bikes.
|
|
wingnut03
New Member
Posts: 37
Likes: 14
Registered: Dec 28, 2018 15:36:23 GMT -7
|
Post by wingnut03 on May 6, 2021 18:56:05 GMT -7
Hi all. Thats out of Performance bikes magazine Feb 2018.It looks like 10 but its more R1,Engine-swingarm-wiring harness-ECU and dripping with race only parts.
|
|
