|
Post by RedAndBlack on Jul 11, 2022 10:49:38 GMT -7
I don't know for sure but the stock fenders look exactly the same. I would check an OEM parts site and if the fenders are the same part number, you're probably ok.
The stock turn signals are different but if the mounting points for the stock turn signals are the same which would be indicative of the stock fender part number being the same between years, you're probably good to go.
|
|
Sponsored Ad
|
magic666
New Member
Posts: 11
Likes: 15
Registered: Apr 7, 2022 6:28:54 GMT -7
|
Post by magic666 on Jul 11, 2022 11:32:24 GMT -7
FYI
Thank you for your interest in the Yoshimura products.
On the 2022 Yamaha MT-10, our R&D department is running behind on getting the newer model verifications done. At the moment, the exhaust is only listed to fit on the 2018-21 models.
We do have the 2022 MT-10 on our list of bikes to bring in for fitment checks, and product development.
Once we do get the bike here, and do the checks, we will post any updates and new release information for it on the Yoshimura website.
Sorry I do not have a better answer for you on this.
Thank you,
|
|
kyle
Full Member
Posts: 127
Likes: 77
Registered: Oct 8, 2021 20:12:42 GMT -7
|
Post by kyle on Jul 11, 2022 18:12:42 GMT -7
FYI Thank you for your interest in the Yoshimura products. On the 2022 Yamaha MT-10, our R&D department is running behind on getting the newer model verifications done. At the moment, the exhaust is only listed to fit on the 2018-21 models. We do have the 2022 MT-10 on our list of bikes to bring in for fitment checks, and product development. Once we do get the bike here, and do the checks, we will post any updates and new release information for it on the Yoshimura website. Sorry I do not have a better answer for you on this. Thank you, Thanks for sharing; I'm going through a similar thing with Givi luggage...They have no ETA on when/if luggage is going to be available for the 2022 MT-10 I always appreciate when a company's support provides some response at least. It's always frustrating to send an email and get no response.
|
|
magic666
New Member
Posts: 11
Likes: 15
Registered: Apr 7, 2022 6:28:54 GMT -7
|
Post by magic666 on Jul 12, 2022 6:19:23 GMT -7
|
|
bento
New Member
Posts: 5
Likes: 12
Registered: Jun 15, 2022 16:34:43 GMT -7
|
Post by bento on Jul 12, 2022 21:59:56 GMT -7
I took some photos after trying to fit the Vagabond elim and it's quite different: fz10.org/post/33468/threadThere are probably some existing ones out there that would clear, but I'd wait for R&D to come through.
|
|
semprenissart
Full Member
Posts: 123
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Aug 24, 2022 8:16:58 GMT -7
I made my own. I went to Lowes and got a small aluminum solid flat. Bended it, drilled 2 holes, spray painted it black and mounted the license plate. It cost me $3 For now I added cheap turn signals from Amazon but I’m hoping someone comes up with an integrated tail light so I can remove the rear turn signals
|
|
|
Post by willl84 on Aug 24, 2022 9:26:04 GMT -7
I made my own. I went to Lowes and got a small aluminum solid flat. Bended it, drilled 2 holes, spray painted it black and mounted the license plate. It cost me $3 For now I added cheap turn signals from Amazon but I’m hoping someone comes up with an integrated tail light so I can remove the rear turn signals I'm hoping someone comes up with an integrated taillight just to get rid of that giant ugly red lens they decided to stick on there this year. The taillight on the first gen looks so sweet
|
|
semprenissart
Full Member
Posts: 123
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Aug 24, 2022 13:11:50 GMT -7
I had an integrated taillight for my FZ09 from TST industries tstindustries.com/tst-led-integrated-tail-light-for-yamaha-fz-09-mt-09-2017-2020.htmlBest taillight I've ever had and it comes either clear or smoke (I had the smoke version) I'm really hoping they'll make one for the MT10. They bought a new MT10, so they might look into it. I contacted them and they said they are currently finishing the taillight for the new MT09 then they'll make a decision whether or not they plan on making one for the new MT10. They told me to check again with them in 3 months
|
|
|
Post by willl84 on Aug 25, 2022 4:01:13 GMT -7
I had an integrated taillight for my FZ09 from TST industries tstindustries.com/tst-led-integrated-tail-light-for-yamaha-fz-09-mt-09-2017-2020.htmlBest taillight I've ever had and it comes either clear or smoke (I had the smoke version) I'm really hoping they'll make one for the MT10. They bought a new MT10, so they might look into it. I contacted them and they said they are currently finishing the taillight for the new MT09 then they'll make a decision whether or not they plan on making one for the new MT10. They told me to check again with them in 3 months That's nice and all but they didn't make one for the first gen MT-10 either so there's that lol. I think the BlasterX is the only decent integrated light for the MT-10 (https://www.customled.com/products/2016-2017-2018-2019-2020-2021-yamaha-mt-10-integrated-led-tail-light). There's some shitty Chinese ones on ebay and Amazon though
|
|
semprenissart
Full Member
Posts: 123
Likes: 68
Registered: Jun 11, 2019 12:03:57 GMT -7
|
Post by semprenissart on Aug 25, 2022 14:53:58 GMT -7
I don't think they had a 1st gen MT10 as they have very few products for it (they probably borrowed it from someone just to do a fender eliminator for it), whereas now they did buy a 2nd gen mt10 so that's why i'm hoping they will come up with an integrated light depsite them saying they don't know yet whether they will or not. If BlasterX comes with one before TST or another company, I might go with them though. Regarding the chinese ones from ebay/amazon, i would stay away from it. I ordered one on amazon to see and it didnt fit without leaving a huge gap in the fairings despite saying it was compatible with the 2022 mt10 and the lights were very dim compared to oem or the aftermarket i had in the past
|
|
|
Post by mt10orc on Aug 25, 2022 21:26:33 GMT -7
+1 for the BlasterX. Have it on my MT and wife’s R1.
|
|
mfz10
New Member
Posts: 2
Likes: 1
Registered: Sept 12, 2022 13:54:32 GMT -7
|
Post by mfz10 on Sept 12, 2022 13:58:58 GMT -7
Im tempted to buy the 2 in 1 carbon plate flipper and fender eliminator from 007plate. Price but it looks very cool with the carbon fiber and aluminum
|
|
jmm0122
New Member
Posts: 23
Likes: 27
Registered: Mar 15, 2022 15:14:41 GMT -7
|
Post by jmm0122 on Sept 30, 2022 15:53:50 GMT -7
For anyone who cares, someone posted on Facebook that New Rage Cycles will be releasing their kit soon. They even posted pictures of it. Looks nice IMO, I will be ordering one.
|
|
adrenaline99
New Member
Posts: 12
Likes: 1
Registered: Sept 29, 2022 10:18:42 GMT -7
|
Post by adrenaline99 on Oct 10, 2022 16:12:42 GMT -7
Been searching for a while for a fender eliminator kit that is made for the 2022s, still don't think there are any out.
|
|
jmm0122
New Member
Posts: 23
Likes: 27
Registered: Mar 15, 2022 15:14:41 GMT -7
|
Post by jmm0122 on Oct 13, 2022 11:45:19 GMT -7
|
|
2022mt10
New Member
Posts: 17
Likes: 9
Registered: Aug 5, 2022 14:16:23 GMT -7
|
Post by 2022mt10 on Oct 14, 2022 10:01:29 GMT -7
Keep us updated on the install. Can you reuse the stock key hole cover?
|
|
jmm0122
New Member
Posts: 23
Likes: 27
Registered: Mar 15, 2022 15:14:41 GMT -7
|
Post by jmm0122 on Oct 15, 2022 17:01:08 GMT -7
Keep us updated on the install. Can you reuse the stock key hole cover? So I got this installed today. It does not come with instructions, but instead directs you to their site that has the last generation MT10 install. It is a completely different kit with its own unique mounting brackets spacers and screws. I used a few videos online for reference but had to pretty much figure it out on my own which wasn't that bad just took some time. I ended up getting the tucked kit. I was worried about how tucked it would be but the regular kit that mounts the plate on the back of the bike doesn't look good to me. I bent the bracket down a bit after install and it is more visible than my last bike that I had for 6 years and never got pulled. You do not reuse the stock key hole cover. There is nowhere to mount it to to and because of the license plate bracket design it would never work. When New Rage Cycles finally gets around to creating instructions I'll double check but from I can tell it's not usable. Overall though I am super happy with the looks of the kit. The turn signals are super bright and everything sits under the tail instead of sticking out like most of the other fender eliminator kits for the 2022's. One thing that I did notice though is in order to take the ECU out to get it flashed the fender eliminator will need to be removed. There are two screws that hold the plastic bracket that sits above the ECU and mounts the servo and IMU. Those screws are covered up by the license plate mount. Meaning removing the ECU is gonna take about 30-45 min. Basically the whole tail of the bike has to come apart to get the ECU out. Not as easy as the last generation but still by no means hard. Here are a few pics of how it looks installed. Hopefully this was helpful to someone and if anyone has any questions just let me know.
|
|
jp
New Member
Posts: 3
Likes: 5
Registered: Jul 16, 2022 3:19:59 GMT -7
|
Post by jp on Oct 21, 2022 20:51:53 GMT -7
I just ordered the nrc tucked as well. What kind of flush mounts are those jmm0122?
|
|
jmm0122
New Member
Posts: 23
Likes: 27
Registered: Mar 15, 2022 15:14:41 GMT -7
|
Post by jmm0122 on Oct 23, 2022 16:33:13 GMT -7
I just ordered the nrc tucked as well. What kind of flush mounts are those jmm0122? Tst Industries.
|
|
adrenaline99
New Member
Posts: 12
Likes: 1
Registered: Sept 29, 2022 10:18:42 GMT -7
|
Post by adrenaline99 on Oct 25, 2022 0:11:45 GMT -7
|
|