vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Mar 19, 2021 20:01:36 GMT -7
I see they make a can just for the mt10, pretty cheap at $400. Anyone here have experience with this can?
|
|
Sponsored Ad
|
pfontainejr
New Member
Posts: 42
Likes: 10
Registered: Jun 6, 2020 12:07:13 GMT -7
|
Post by pfontainejr on Mar 20, 2021 5:46:07 GMT -7
I see they make a can just for the mt10, pretty cheap at $400. Anyone here have experience with this can? Got it and love it with the Leo Vince link pipe!! |
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Mar 20, 2021 10:03:51 GMT -7
I see they make a can just for the mt10, pretty cheap at $400. Anyone here have experience with this can? Got it and love it with the Leo Vince link pipe!! Got a video of the sound? I did some digging on this forum and some people say it’s too quiet . I also have that Leovince pipe so it’ll be nice to know exactly what mine would sound like |
|
pfontainejr
New Member
Posts: 42
Likes: 10
Registered: Jun 6, 2020 12:07:13 GMT -7
|
Post by pfontainejr on Mar 20, 2021 12:49:08 GMT -7
Got it and love it with the Leo Vince link pipe!! Got a video of the sound? I did some digging on this forum and some people say it’s too quiet . I also have that Leovince pipe so it’ll be nice to know exactly what mine would sound like Sorry, i do not. From my journey into finding the right setup it was only too quite with the OEM link pipe.....this combo is just right! (think goldilocks and the 3 bears!!!)  FYI, i found the Yoshi MT-10 exhaust for around $300 new. |
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Mar 20, 2021 13:19:39 GMT -7
Got a video of the sound? I did some digging on this forum and some people say it’s too quiet . I also have that Leovince pipe so it’ll be nice to know exactly what mine would sound like Sorry, i do not. From my journey into finding the right setup it was only too quite with the OEM link pipe.....this combo is just right! (think goldilocks and the 3 bears!!!) FYI, i found the Yoshi MT-10 exhaust for around $300 new. Where from? Yamaha has it for $400 |
|
pfontainejr
New Member
Posts: 42
Likes: 10
Registered: Jun 6, 2020 12:07:13 GMT -7
|
Post by pfontainejr on Mar 20, 2021 15:49:03 GMT -7
Sorry, i do not. From my journey into finding the right setup it was only too quite with the OEM link pipe.....this combo is just right! (think goldilocks and the 3 bears!!!) FYI, i found the Yoshi MT-10 exhaust for around $300 new. Where from? Yamaha has it for $400 I'd have to see if i can find the invoice....all i did was Google B67-E47A0-T0-00 |
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Mar 20, 2021 19:23:27 GMT -7
Where from? Yamaha has it for $400 I'd have to see if i can find the invoice....all i did was Google B67-E47A0-T0-00 I see partzilla has it, $345 after tax. Not too bad. only issue would be It'd be running lean without a retune. |
|
pfontainejr
New Member
Posts: 42
Likes: 10
Registered: Jun 6, 2020 12:07:13 GMT -7
|
Post by pfontainejr on Mar 21, 2021 7:34:42 GMT -7
I'd have to see if i can find the invoice....all i did was Google B67-E47A0-T0-00 I see partzilla has it, $345 after tax. Not too bad. only issue would be It'd be running lean without a retune. partzilla or partspak and Yes, you will def want to have your ECU flashed. I highly recommend & have abused 2 Wheel Dynoworks with 3+ flashes during my exhaust journey! The Yoshi MT-10 exhaust, Leo Vince link pipe and 2WDW flash are clear winners IMHO!! There is someone on this forum that has done the same....i believe he had a video up of the sound. Worth a quick search. |
|
|
|
Post by evitzee on Mar 21, 2021 18:44:56 GMT -7
You don't need a tune if you aren't modifying or removing the cat box, a pure slip on can (like the Yoshimura sold by Yamaha) is simple. Take off the old, put on the new.....ride. It's a 15 minute operation. I hate loud exhausts, but people have convinced themselves that louder means more power. I replaced the stock unit with a Yoshimura Alpha T, it's bigger and better finished than the one Yamaha sells. It's about $550 at places like Revzilla. Nice deep tone, but not obnoxious. Simple installation, no tune needed.  |
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Mar 22, 2021 15:29:11 GMT -7
I already have a tune from 2WDW, I think I'm just gonna wait until winter and get a full apra or yoshi system all titanium just for the blueing, or at least a can just so I can have it sent to tune while I can't ride.
|
|
|
|
Post by sdshawn on Mar 23, 2021 21:59:12 GMT -7
How does the sound level compare to stock with Cat and Yoshi can? I just about have my bike where I want it with extras for now but I'm still missing a little bit more sound . I have pulled the can off and almost like the sound of it without the can straight from the cat but still a bit to loud I'm getting ready to shorten the stock can or plug some holes one by one to tune in the baffle until I get noise level somewhere between can and no can with cat sound level to my liking..
|
|
xroadracer
New Member
Posts: 24
Likes: 2
Registered: Apr 30, 2021 16:34:03 GMT -7
|
Post by xroadracer on May 31, 2021 3:41:46 GMT -7
I see they make a can just for the mt10, pretty cheap at $400. Anyone here have experience with this can? Got it and love it with the Leo Vince link pipe!! This is the perfect post. I bought an -10 with the Y series slip on it. I picked up a new LV link pipe from an individual yesterday ($100), however, the flange on the end that connects to the can is a female connection. The slip-on is also a female connection. Either I bought the wrong pipe or I'm an idiot and don't understand how it connects. The hardware that came with it does not include and adapters. Can you check out the pics and see what I'm missing? Thanks much and thank you for the read. -Mike    |
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on May 31, 2021 17:13:08 GMT -7
Got it and love it with the Leo Vince link pipe!! This is the perfect post. I bought an -10 with the Y series slip on it. I picked up a new LV link pipe from an individual yesterday ($100), however, the flange on the end that connects to the can is a female connection. The slip-on is also a female connection. Either I bought the wrong pipe or I'm an idiot and don't understand how it connects. The hardware that came with it does not include and adapters. Can you check out the pics and see what I'm missing? Thanks much and thank you for the read. -Mike The can shouldve came with a mounting ring(retaining ring can't remember the name) albeit I have a stock can, but see if these pics help. imgur.com/a/tmgVCJK |
|
pfontainejr
New Member
Posts: 42
Likes: 10
Registered: Jun 6, 2020 12:07:13 GMT -7
|
Post by pfontainejr on Jun 1, 2021 2:58:20 GMT -7
This is the perfect post. I bought an -10 with the Y series slip on it. I picked up a new LV link pipe from an individual yesterday ($100), however, the flange on the end that connects to the can is a female connection. The slip-on is also a female connection. Either I bought the wrong pipe or I'm an idiot and don't understand how it connects. The hardware that came with it does not include and adapters. Can you check out the pics and see what I'm missing? Thanks much and thank you for the read. -Mike The Leo will tightly slide right into the MT-10 Yoshi...no clamp needed. |
|
xroadracer
New Member
Posts: 24
Likes: 2
Registered: Apr 30, 2021 16:34:03 GMT -7
|
Post by xroadracer on Jun 9, 2021 5:26:16 GMT -7
I see they make a can just for the mt10, pretty cheap at $400. Anyone here have experience with this can? Got it and love it with the Leo Vince link pipe!! Good Morning. Leo Vince makes 2 link pipes for the MT-10. Can you forward a link to which of the two you bought that worked with the Y-Series? Or, check your invoice to see what part number you ordered. I picked up an unused, LV link pipe from a private seller, but best as I can tell, it doesn't line up with the Y-Series. More specifically, the Y-Series needs a link pipe connection that's is a "male" to slip inside the can. My link pipe has a female connection. ![]() This would be a huge help.  |
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Jun 9, 2021 16:08:08 GMT -7
|
|
xroadracer
New Member
Posts: 24
Likes: 2
Registered: Apr 30, 2021 16:34:03 GMT -7
|
Post by xroadracer on Jun 10, 2021 10:39:11 GMT -7
Good Morning. Leo Vince makes 2 link pipes for the MT-10. Can you forward a link to which of the two you bought that worked with the Y-Series? Or, check your invoice to see what part number you ordered. I picked up an unused, LV link pipe from a private seller, but best as I can tell, it doesn't line up with the Y-Series. More specifically, the Y-Series needs a link pipe connection that's is a "male" to slip inside the can. My link pipe has a female connection. ![]() This would be a huge help. Item: P377033 SKU: 1212903 PERFECT! Thank you very much. Last thing... Did you run your bike for any period of time before getting the ECU flashed? The soonest I can get the ECU flashed is next week. Thanks much. |
|
jlapaglia
New Member
Posts: 49
Likes: 11
Registered: Jul 9, 2019 9:37:40 GMT -7
|
Post by jlapaglia on Jun 10, 2021 12:23:09 GMT -7
|
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Jun 10, 2021 15:09:05 GMT -7
|
|
vullnet
Junior Member
Posts: 97
Likes: 13
Registered: Sept 23, 2020 17:59:45 GMT -7
|
Post by vullnet on Jun 10, 2021 15:09:23 GMT -7
Did it over the winter so i didn't have any downtime in riding time. |
|
