Deleted
Posts: 0
Registered: Mar 29, 2024 0:32:54 GMT -7
|
Post by Deleted on Oct 12, 2019 11:58:14 GMT -7
Just like the title says. Want to replace both with a nice-looking S/S alternative, especially the front, which is aluminum. Both use a 32mm socket, so they might be the same. I want to replace them with something like this:
Thanks gang. JC
|
|
Deleted
Posts: 0
Registered: Mar 29, 2024 0:32:54 GMT -7
|
Post by Deleted on Oct 13, 2019 11:56:15 GMT -7
Imagined I wouldn't get any help, but doesn't hurt to try . Anyway, finally found out both sizes. To help other potential axle nut buyers, here are the dimensions: FRONT: M24 x 1.00 REAR: M24 x 1.50
|
|
aavmann
Junior Member
Posts: 93
Likes: 35
Registered: Mar 14, 2019 21:05:34 GMT -7
|
Post by aavmann on Oct 13, 2019 12:39:29 GMT -7
Imagined I wouldn't get any help, but doesn't hurt to try . Anyway, finally found out both sizes. To help other potential axle nut buyers, here are the dimensions: FRONT: M24 x 1.00 REAR: M24 x 1.50 Yeah. Don’t sweat it.... can’t count the number of posts I’m made or seen with zero responses. People are people...just the way it is. I’ve put effort into some feeling really good about what I’m sharing with the team only to be met with crickets. I bet the majority just come on to read and not necessarily contribute. So long as you feel it was a valid question or response than that’s all that matters Cheers
|
|
dkim213
Full Member
Posts: 203
Likes: 77
Registered: Jan 15, 2019 11:04:09 GMT -7
|
Post by dkim213 on Oct 13, 2019 12:54:17 GMT -7
Imagined I wouldn't get any help, but doesn't hurt to try . Anyway, finally found out both sizes. To help other potential axle nut buyers, here are the dimensions: FRONT: M24 x 1.00 REAR: M24 x 1.50 Thanks for the info. First sentence doesn’t seem necessary.
|
|
Deleted
Posts: 0
Registered: Mar 29, 2024 0:32:54 GMT -7
|
Post by Deleted on Oct 14, 2019 17:46:32 GMT -7
Thanks for the info. First sentence doesn’t seem necessary. You're welcome . And hey, it wasn't 'necessary' for me to post my findings, right? As Aavmann commented, it's just the truth man. Nothing wrong with that in my book, but I see people get offended with anything nowadays, so guess will refrain from posting even more, since I always tell it like it is, and not everybody can take it .
|
|
dkim213
Full Member
Posts: 203
Likes: 77
Registered: Jan 15, 2019 11:04:09 GMT -7
|
Post by dkim213 on Oct 14, 2019 18:03:45 GMT -7
Do whatever it is you think is necessary. Share info, don’t share info, doesn’t matter to me, but don’t get butt hurt about no one responding. They probably don’t know the answer or don’t care.
|
|