twistydave
New Member
Posts: 22
Likes: 5
Registered: Mar 2, 2019 19:23:35 GMT -7
|
Post by twistydave on Apr 2, 2019 13:15:06 GMT -7
Been searching for lower passenger foot pegs for comfort without success. I don't have any passenger pegs on my bike currently. Does anyone know if the FJ09 pegs would work? Is there others that would fit? I'll post up if I find a solution. Thanks if anyone else has input.
|
|
Sponsored Ad
|
|
|
Post by RedAndBlack on Apr 2, 2019 13:35:29 GMT -7
FZ09 and FZ10 use the same bracket so it'll work. And I've read that the FJ-09 will work as well which are supposed to be even lower. Granted, I haven't tried this so I'd go to a dealer and measure first.
Rizoma makes ones but they're crazy expensive. I imagine getting an OEM passenger peg from an FZ or FJ09 will be much cheaper, especially if used.
|
|
xped
New Member
Posts: 14
Likes: 4
Registered: Aug 16, 2018 16:48:44 GMT -7
|
Post by xped on Apr 4, 2019 15:54:59 GMT -7
|
|
fz10minesrdripper
Full Member
Posts: 130
Likes: 41
Registered: Jul 5, 2018 21:59:05 GMT -7
|
Post by fz10minesrdripper on Apr 4, 2019 19:20:07 GMT -7
FZ09 and FZ10 use the same bracket so it'll work. And I've read that the FJ-09 will work as well which are supposed to be even lower. Granted, I haven't tried this so I'd go to a dealer and measure first. Rizoma makes ones but they're crazy expensive. I imagine getting an OEM passenger peg from an FZ or FJ09 will be much cheaper, especially if used. My bike has FZ09 brackets. I bought these cool pegs that lower it even further. The actual pegs I bought are super cool I think. They're are flat instead of being round. I think they look awesome and the should be more comfortable for my wife...when she finally gets back on my bike this summer. I'll send a link to the foot pegs...they were cheap too.
Ripper,
|
|
fz10minesrdripper
Full Member
Posts: 130
Likes: 41
Registered: Jul 5, 2018 21:59:05 GMT -7
|
Post by fz10minesrdripper on Apr 4, 2019 20:51:05 GMT -7
|
|
denis998
New Member
Posts: 2
Registered: Oct 30, 2018 20:36:59 GMT -7
|
Post by denis998 on Apr 19, 2019 20:27:27 GMT -7
Hi
I installed bracket from FZ1 2012_2016 on my FZ10 and they are just fine.
|
|
cp3ryder
New Member
Previous bikes: 84 FJ600, 87 VFR700, 03 CBR600F4i, 15 FJ09, 16 XSR900, 13 F6B.
Posts: 20
Likes: 4
Registered: Jun 8, 2019 6:47:22 GMT -7
|
Post by cp3ryder on Sept 13, 2019 4:48:46 GMT -7
FJ09 brackets vs stock.  |
|
Deleted
Posts: 0
Registered: Apr 24, 2024 5:57:46 GMT -7
|
Post by Deleted on Sept 13, 2019 9:46:24 GMT -7
I bought MT/FZ/FJ-09 Evotech passenger peg plates (which I just removed, in favor of proper Sato racing hooks), and they fit perfectly, so all I can tell you is that the passenger peg spacing/hardware on those bikes is the same as FZ/MT-10s. Hope this helps.
|
|
freemaysin
New Member
Posts: 18
Likes: 6
Registered: Aug 27, 2019 18:59:05 GMT -7
|
Post by freemaysin on Sept 19, 2019 18:16:01 GMT -7
I recently purchased some 2017 FJ09 passenger peg brackets off of partzilla.com, they were $55 a piece which was like 15$ more a piece than the OEM ones i was needing as my bike was missing them when i got it used. They are significantly longer and a little wider offset as well, but bolt up identically! i measured the fz07 and fz09 while i was at the dealer the other day to make sure and the FZ07's wont fit but the FZ09's did and so did the FJ09 so if that's what your looking for i would pull the trigger on them personally! i couldn't find anything else anywhere and none the less with a OEM fit and finish you can't beat it
Only better thing would be to find some used? but i looked before i bought mine and couldn't find them anywhere
|
|
jharmon718
New Member
Posts: 38
Likes: 14
Registered: Feb 16, 2019 6:48:32 GMT -7
|
Post by jharmon718 on Oct 4, 2019 12:05:49 GMT -7
Most people selling the FJ-09/Tracer 900 rear peg brackets are asking $200 for a set.. I bought mine new online for $100. The girlfriend is much happier riding on the back now.  |
|
warnock
Full Member
Posts: 132
Likes: 55
Registered: Aug 23, 2016 14:01:04 GMT -7
|
Post by warnock on Feb 19, 2020 10:05:36 GMT -7
Most people selling the FJ-09/Tracer 900 rear peg brackets are asking $200 for a set.. I bought mine new online for $100. The girlfriend is much happier riding on the back now. What year fj09 and could you send a link to where you got the brackets for $100. Thanks |
|
jharmon718
New Member
Posts: 38
Likes: 14
Registered: Feb 16, 2019 6:48:32 GMT -7
|
Post by jharmon718 on Feb 19, 2020 10:09:20 GMT -7
2PP-2742L-00-00
2PP-2741L-00-00
Here are the part numbers. Honestly don't remember what year I looked up. I was going to buy them from motosport.com but had some Zilla Bucks to spend so I had revzilla price match them. Out the door with tax and all it was like $125 shipped.
|
|
warnock
Full Member
Posts: 132
Likes: 55
Registered: Aug 23, 2016 14:01:04 GMT -7
|
Post by warnock on Feb 19, 2020 10:18:37 GMT -7
Thank you for the quick response! Appreciate it.
|
|
jharmon718
New Member
Posts: 38
Likes: 14
Registered: Feb 16, 2019 6:48:32 GMT -7
|
Post by jharmon718 on Feb 19, 2020 10:21:44 GMT -7
Thank you for the quick response! Appreciate it. Anytime! |
|
warnock
Full Member
Posts: 132
Likes: 55
Registered: Aug 23, 2016 14:01:04 GMT -7
|
Post by warnock on Feb 19, 2020 10:48:30 GMT -7
Thank you for the quick response! Appreciate it. Anytime! Have you done any other mods to make it more comfortable for your passenger? My girlfriend has been saying her back hurts a lot so seeing what else I can do. I figured I’d start with this. |
|
jharmon718
New Member
Posts: 38
Likes: 14
Registered: Feb 16, 2019 6:48:32 GMT -7
|
Post by jharmon718 on Feb 19, 2020 11:03:25 GMT -7
Have you done any other mods to make it more comfortable for your passenger? My girlfriend has been saying her back hurts a lot so seeing what else I can do. I figured I’d start with this. Just the brackets and the Yamaha comfort seat. The wife said she wouldn't ride with the stock seat and pegs and now she doesn't mind at all. |
|
pc1978
Full Member
Posts: 104
Likes: 55
Registered: Jan 8, 2020 15:51:27 GMT -7
|
Post by pc1978 on Feb 19, 2020 12:35:20 GMT -7
I had to by the complete part sets for mine since it didn’t come with OEM pillion pegs (bought the bike used). I bought them for a 2019 Tracer. Bought them from Babbitt’s, the brackets only are $45.11 each and I found a coupon code for 10% off. Part 42 and 51 in link: www.babbittsonline.com/oemparts/a/yam/5b27c85d87a8661118ea012b/stand-footrestNext up for me is the comfort seat, wife says the stock feels like sitting on a board. We also use Oxford riding grips, they go around the drivers waist. When riding in curves or accelerating fast (tap on the leg to indicate) she holds directly onto me. But other times they allow her to sit up straight and give her back a break from being leaned over, but still have solid points of contact to hold onto.  |
|
warnock
Full Member
Posts: 132
Likes: 55
Registered: Aug 23, 2016 14:01:04 GMT -7
|
Post by warnock on Feb 19, 2020 16:59:06 GMT -7
I had to by the complete part sets for mine since it didn’t come with OEM pillion pegs (bought the bike used). I bought them for a 2019 Tracer. Bought them from Babbitt’s, the brackets only are $45.11 each and I found a coupon code for 10% off. Part 42 and 51 in link: www.babbittsonline.com/oemparts/a/yam/5b27c85d87a8661118ea012b/stand-footrestNext up for me is the comfort seat, wife says the stock feels like sitting on a board. We also use Oxford riding grips, they go around the drivers waist. When riding in curves or accelerating fast (tap on the leg to indicate) she holds directly onto me. But other times they allow her to sit up straight and give her back a break from being leaned over, but still have solid points of contact to hold onto. Do you think the pegs you bought are lower then the fj09 pegs? Or are they the same |
|
jharmon718
New Member
Posts: 38
Likes: 14
Registered: Feb 16, 2019 6:48:32 GMT -7
|
Post by jharmon718 on Feb 19, 2020 17:07:04 GMT -7
I had to by the complete part sets for mine since it didn’t come with OEM pillion pegs (bought the bike used). I bought them for a 2019 Tracer. Bought them from Babbitt’s, the brackets only are $45.11 each and I found a coupon code for 10% off. Part 42 and 51 in link: www.babbittsonline.com/oemparts/a/yam/5b27c85d87a8661118ea012b/stand-footrestNext up for me is the comfort seat, wife says the stock feels like sitting on a board. We also use Oxford riding grips, they go around the drivers waist. When riding in curves or accelerating fast (tap on the leg to indicate) she holds directly onto me. But other times they allow her to sit up straight and give her back a break from being leaned over, but still have solid points of contact to hold onto. Do you think the pegs you bought are lower then the fj09 pegs? Or are they the same Tracer and FJ-09 are the same bike |
|
warnock
Full Member
Posts: 132
Likes: 55
Registered: Aug 23, 2016 14:01:04 GMT -7
|
Post by warnock on Feb 19, 2020 17:08:58 GMT -7
Oh wow lol. Thank you for clarification and fast response as always. You the man.
|
|
