Deleted
Posts: 0
Registered: Mar 29, 2024 2:48:36 GMT -7
|
Post by Deleted on Nov 17, 2018 20:49:15 GMT -7
has anyone flipped over the rod to see whether the QS will work properly in GP shift pattern? thanks
|
|
peripateticmike
Full Member
Posts: 140
Likes: 39
Registered: Feb 25, 2018 10:09:30 GMT -7
|
Post by peripateticmike on Nov 17, 2018 20:56:42 GMT -7
If you switch over to GP shift and flip the rod upside down, I don't see why it wouldn't work. I switched to GP, but no QS on my FZ.
|
|
Deleted
Posts: 0
Registered: Mar 29, 2024 2:48:36 GMT -7
|
Post by Deleted on Nov 17, 2018 21:08:53 GMT -7
If you switch over to GP shift and flip the rod upside down, I don't see why it wouldn't work. I switched to GP, but no QS on my FZ. That’s what I was thinking and hoping, but just wondered if anyone had done it. Thnx
|
|
Deleted
Posts: 0
Registered: Mar 29, 2024 2:48:36 GMT -7
|
Post by Deleted on Nov 21, 2018 5:27:48 GMT -7
If you switch over to GP shift and flip the rod upside down, I don't see why it wouldn't work. I switched to GP, but no QS on my FZ. That’s what I was thinking and hoping, but just wondered if anyone had done it. Thnx I did it and it seemed to work fine for Neutral and the first couple gears.
|
|
Deleted
Posts: 0
Registered: Mar 29, 2024 2:48:36 GMT -7
|
Post by Deleted on Dec 1, 2018 15:54:26 GMT -7
That’s what I was thinking and hoping, but just wondered if anyone had done it. Thnx I did it and it seemed to work fine for Neutral and the first couple gears. So I managed to go for a quick boot and I have no problem shifting manually in GP pattern. But the Quick Shifter won’t work at all. Anyone have success with GP shift by flipping the elbow over on a 2018 MT10? For now, I’ve put it back to standard shift, but would really appreciate if someone please let me know. Thanks much
|
|