|
|
Post by clayton on Apr 5, 2018 6:55:35 GMT -7
I’ll be changing out my exhaust in a few weeks with a yoshi 3/4 from the headers back. All you guys that have aftermarket exhaust were you able to reuse the exhaust gaskets between the midpipe and the headers?
|
|
rs
Junior Member
Posts: 58
Likes: 30
Registered: Apr 21, 2017 4:13:21 GMT -7
|
Post by rs on Apr 5, 2018 10:05:06 GMT -7
I watched several videos on this and saw where people popped them right out. I bought new ones and still tried to remove the old ones anyway. They (mine) didn't pop right out and are completely stuck to the sides of the "old" exhaust. My advice is to save yourself the trouble and buy new. They are not that expensive and seal it up nice and tight without issue. Just my .02
|
|
|
|
Post by achrista on Apr 5, 2018 10:24:03 GMT -7
I watched several videos on this and saw where people popped them right out. I bought new ones and still tried to remove the old ones anyway. They did't pop right about and are completely stuck to the sides of the "old" exhaust. My advice is to save yourself the trouble and buy new. They are not that expensive and seal it up nice and tight without issue. Just my .02 it's a best practice and safe insurance policy against any leaks. it's worth the price of the gaskets to ensure you won't have to redo the job for something so simple. |
|
superspirit
Full Member
Posts: 215
Likes: 86
Registered: Oct 2, 2017 14:59:43 GMT -7
|
Post by superspirit on Apr 5, 2018 12:10:16 GMT -7
My exhaust is a slip fit, eliminating the gasket altogether.
|
|
