|
|
Post by clayton on Apr 2, 2018 12:52:09 GMT -7
Just placed my order thru Amazon for a new yoshi Alfa T 3/4 stainless exhaust for my MT-10. Every place I’ve been looking there selling for $719. Happen to check amazon today and there going for $672 shipped. Figured I probably won’t find them much cheaper than that.  |
|
Sponsored Ad
|
superspirit
Full Member
Posts: 214
Likes: 84
Registered: Oct 2, 2017 14:59:43 GMT -7
|
Post by superspirit on Apr 2, 2018 13:14:27 GMT -7
That's a good buy. I was thinking about that exhaust till I found out about the hindle. Like to see how it sounds in person.
|
|
jroc
Junior Member
Posts: 98
Likes: 39
Registered: Feb 18, 2018 7:47:50 GMT -7
|
Post by jroc on Apr 2, 2018 13:25:19 GMT -7
|
|
|
|
Post by clayton on Apr 2, 2018 14:27:32 GMT -7
Gaahhh!!! I just spent $11 extra dollars. That’s a 12 pak beer right there |
|
jroc
Junior Member
Posts: 98
Likes: 39
Registered: Feb 18, 2018 7:47:50 GMT -7
|
Post by jroc on Apr 2, 2018 14:43:47 GMT -7
Gaahhh!!! I just spent $11 extra dollars. That’s a 12 pak beer right there Depends on your choice of poison  I only posted that link for others to consider. I recently found that site, and realized their advertised prices weren't what their "in the shopping cart" prices were. Good choice on exhaust though, I heavily considered this one. I ultimately chose a different brand as I was worried the Yoshi Alpha wouldn't fit under my hard cases. |
|
|
|
Post by clayton on Apr 2, 2018 15:17:49 GMT -7
Gaahhh!!! I just spent $11 extra dollars. That’s a 12 pak beer right there Depends on your choice of poison I only posted that link for others to consider. I recently found that site, and realized their advertised prices weren't what their "in the shopping cart" prices were. Good choice on exhaust though, I heavily considered this one. I ultimately chose a different brand as I was worried the Yoshi Alpha wouldn't fit under my hard cases. Ya I didn’t really think the price would be lower after you add it to cart. Gunna have to start doing that when ordering stuff from now on. Thanks for posting |
|
|
|
Post by clayton on Apr 4, 2018 14:45:29 GMT -7
|
|
superspirit
Full Member
Posts: 214
Likes: 84
Registered: Oct 2, 2017 14:59:43 GMT -7
|
Post by superspirit on Apr 4, 2018 15:13:34 GMT -7
Sweet. let's here it.
|
|
superspirit
Full Member
Posts: 214
Likes: 84
Registered: Oct 2, 2017 14:59:43 GMT -7
|
Post by superspirit on Apr 4, 2018 15:14:56 GMT -7
Hear. Can't edit with tapatalk
|
|
|
|
Post by clayton on Apr 4, 2018 15:19:08 GMT -7
Hear. Can't edit with tapatalk Man I wish. Gotta wait a few more weeks. Just spent $900 on this exhaust and a seat concepts seat. Gotta wait for another paycheck so I can get the ecu reflashed and get block off plates and install them. |
|
|
|
Post by clayton on Apr 4, 2018 16:08:41 GMT -7
Anyone know the factory thread size of the o2 sensors? I need to order 2 plugs to plug up the holes where the o2 sensors go in the mid pipes since I’ll be getting the flash done and won’t need the sensors installed. I wanna use stainless steel plugs.
|
|
superspirit
Full Member
Posts: 214
Likes: 84
Registered: Oct 2, 2017 14:59:43 GMT -7
|
Post by superspirit on Apr 4, 2018 18:50:59 GMT -7
If your getting a flash from Nels just order the block of plates and o2 plugs from him. Most o2's are the same size.I think they are 18mm, but I'm not positive.
|
|
stealthunion
Junior Member
Posts: 61 
Likes: 33
|
Post by stealthunion on Apr 4, 2018 23:59:34 GMT -7
Congratulations, Clayton. It's an awesome choice. I have the same one on my FZ-10 and I got it from BioHazardCycles. Nels flashed the ECU and Dyno-ed the bike for me. Ride safe and have fun!
|
|
|
|
Post by clayton on Apr 5, 2018 5:30:42 GMT -7
Congratulations, Clayton. It's an awesome choice. I have the same one on my FZ-10 and I got it from BioHazardCycles. Nels flashed the ECU and Dyno-ed the bike for me. Ride safe and have fun! What kinda power did your bike make on the dyno? |
|
stealthunion
Junior Member
Posts: 61
Likes: 33
|
Post by stealthunion on Apr 5, 2018 11:10:58 GMT -7
Congratulations, Clayton. It's an awesome choice. I have the same one on my FZ-10 and I got it from BioHazardCycles. Nels flashed the ECU and Dyno-ed the bike for me. Ride safe and have fun! What kinda power did your bike make on the dyno? 152.5hp |
|
|
|
Post by clayton on Apr 5, 2018 11:15:10 GMT -7
What kinda power did your bike make on the dyno? 152.5hp Wow awesome!! Are u running the stock air filter? |
|
stealthunion
Junior Member
Posts: 61
Likes: 33
|
Post by stealthunion on Apr 5, 2018 11:43:28 GMT -7
Wow awesome!! Are u running the stock air filter? Yes, Stock Filter. Nels from 2Wheel DynoWorks said that there were one or two bikes that gave higher hp than mine (155hp) but they had a $3k Graves Full System. I paid $630 for mine...so I am a happy camper 😀 |
|
mt10beast
New Member
Posts: 12
Likes: 2
Registered: Jul 24, 2017 12:17:35 GMT -7
|
Post by mt10beast on May 12, 2018 6:14:48 GMT -7
Just placed my order thru Amazon for a new yoshi Alfa T 3/4 stainless exhaust for my MT-10. Every place I’ve been looking there selling for $719. Happen to check amazon today and there going for $672 shipped. Figured I probably won’t find them much cheaper than that. Just wondering if you rode the bike much after fitting exhaust before getting it flashed and tuned. I got one of these on mine a couple weeks ago and plan on getting flash and tune soon, but it really does run Like a bag of sh*t at the moment, runs good when revs are up but lower down on a steady throttle around 5-6K rpms it’s like it’s surging and misfiring almost. Notice it more when banked over in a turn, hopefully just needs a good tune.. did you find this with yours.. Cheers |
|
|
|
Post by clayton on May 12, 2018 8:05:16 GMT -7
Haven’t got a lot of seat time on it yet. I sent the ecu to 2wdw while I was installing the yoshi on. I feel I’m getting a little of what ur saying when I hold a steady 3k-4K rpm. I haven’t called 2wdw back yet, but I’m thinking of getting the ftecu active tune auto tuner from Nels and seeing how that will work out. Just have to get a few othe things paid off before doing it.
|
|
mt10beast
New Member
Posts: 12
Likes: 2
Registered: Jul 24, 2017 12:17:35 GMT -7
|
Post by mt10beast on May 12, 2018 8:14:05 GMT -7
Ok mate, so you have had it tuned then, but not fully custom re-mapped.. Yeah I have had Akra slip on and decat on my last MT10 and then Full Akra system and never did it run as bad as this one is now. It feels so choppy around 4-6K rpms with a steady throttle and way more exaggerated when in a turn, probably because of feathering the throttle.. Hopefully some other peepz may answer this on what there bike feels like decatted without a tune..
|
|
I only posted that link for others to consider. I recently found that site, and realized their advertised prices weren't what their "in the shopping cart" prices were.
